Retirement & Investing · Tool
General Retirement Calculator
Given your savings, contributions, spending, and Social Security, this shows when your money runs out — or that it doesn’t — with the tax bill included. Free, no login, and taxes are modeled, not silently excluded.
Financial Freaks
General Retirement Calculator — result sheet
With the defaults — 45 years old, retiring at 65, $250,000 traditional, $50,000 Roth, $25,000 taxable, $15,000 and $5,000 a year going in, spending $60,000 a year in today’s dollars, a $2,500 PIA claimed at 67 — the balance reaches $2,103,541 at 65 and $2,701,309 at 90, after $588,596 of federal tax across the whole retirement. The first year takes 4.67% of the balance; the 4% rule would say 4%. Change the claiming age, the spending, or the returns and watch the year the money runs out move — that is the whole decision. This tool is the assembly: the growth engine for the saving years, a three-bucket drawdown for the spending years, the Social Security claiming module for the benefit, and a federal tax model that charges tax on the withdrawals as they happen.
1. You
Your full retirement age and your required-minimum-distribution age both come from your birth year.
You are 45. Born 1960 or later: full retirement age 67. Born 1955–1959: 66 and 2 to 10 months. Born 1943–1954: 66.
Set this to your current age if you are already retired — the saving years run zero months and only the drawdown runs.
The age the plan has to last to. About 82 for a man, about 85 for a woman at 65, per the SSA life table. Your family history and health are the better guide.
The tax brackets and the standard deduction follow this choice. Head of household and married filing separately are not modeled in this version.
2. What you have, and what you save
Pre-tax money: taxed as ordinary income when you take it out. This is also the only bucket with required minimum distributions.
After-tax money: withdrawals are tax-free if the rules are met, and there are no lifetime required minimum distributions on Roth accounts.
Already-taxed money. This tool treats withdrawals from it as basis — no capital gains are modeled on this bucket.
What goes into the traditional bucket each year while you work.
What goes into the Roth bucket each year while you work.
What goes into the taxable bucket each year while you work.
Applies to all three contribution streams, each year on the retirement anniversary. Set it to 0 for contributions that never grow.
3. The assumptions
The assumed annual return on all three buckets while you work. An assumption, not a forecast.
The assumed annual return on all three buckets once retired. The results also show the whole plan at 2 points lower and 2 points higher, so the range is visible beside the headline.
Spending and Social Security both escalate at this rate. The long-run CPI average is about 3%.
What you plan to spend each year, in today’s dollars. It escalates at the inflation assumption from today, so the nominal figure in the table grows every year.
An approximation: one flat rate applied to your federal taxable income. Your state taxes income differently — this is a rough allowance, not a state tax computation. Leave it at 0 to model federal tax only.
4. Social Security and other income
Your primary insurance amount — the benefit Social Security pays at your full retirement age, from your statement at ssa.gov/myaccount. Enter 0 for no Social Security modeled.
Defaults to your full retirement age. The comparison panel below runs 62, your full retirement age, and 70 side by side, so you can see what each one does to the year the money runs out.
The amount your pension pays in the retirement year. Federal readers: enter your FERS annuity here — get it first from the FERS Annuity Estimator.
Your pension’s own cost-of-living adjustment, applied from the retirement year. A pension with no COLA loses purchasing power every year it pays.
Part-time work, rental income, anything else that arrives every year in retirement. It stays flat — it does not escalate.
How this is calculated
The saving years. Each bucket grows month by month at the return you entered while saving, with your contributions added at month-end and escalated by the contribution increase each year. The three buckets are grown separately, so the split between traditional, Roth, and taxable at retirement is exact — it is the growth engine’s own math, the same core the Compound Interest Calculator runs.
The spending years. Once retired, the tool steps month by month: each bucket grows at the retirement return, then the month’s spending plus the month’s tax, minus the month’s income (Social Security + pension + other), is taken out. Taxable money goes first, then traditional, then Roth — that order is a modeling choice, not advice, and it is the order the coordinating-accounts guide compares. Required minimum distributions force traditional withdrawals from the RMD age whether the spending needs them or not; the excess over the spending gap moves into the taxable bucket at month-end.
Social Security. The monthly benefit follows SSA’s formulas from the PIA you enter: reduced 5/9 of 1% a month for the first 36 months before full retirement age and 5/12 of 1% after that, or increased 2/3 of 1% a month (8% a year) for claiming after full retirement age, up to 70. The benefit escalates at the inflation assumption from today. If you claim before retirement, those years’ benefits are not added to the portfolio — they are assumed to fund those years’ living costs the way salary does. If you claim after retirement, the years before claiming have no Social Security income and the portfolio funds them.
The tax. Each retirement year’s federal tax is solved by fixed-point iteration: start with tax $0, run the year, compute the tax from that year’s actual withdrawals and income, re-run the year with the new tax, and repeat until the change is under a cent or ten passes. Traditional withdrawals, taxable Social Security, pension, and other income are taxed; Roth withdrawals are not, and taxable-bucket withdrawals are treated as basis. Taxable Social Security uses the proper combined-income computation: combined income is other income plus half the Social Security benefit, and the taxable share is 0% below $25,000 ($32,000 married), up to 50% between $25,000 and $34,000 ($32,000–$44,000 married), and up to 85% above $34,000 ($44,000 married). The 2027 brackets and standard deduction ($16,600 single, $33,200 married) are held flat for every future year. Because the thresholds are fixed dollars while benefits escalate with inflation, more of the benefit becomes taxable over the decades — that bracket creep is visible in the yearly table’s tax column.
Required minimum distributions. Traditional money only. The RMD age is 72 if you were born in 1950 or earlier, 73 if born 1951–1959, and 75 if born 1960 or later. Each year’s RMD is the prior December 31 traditional balance divided by the Uniform Lifetime Table divisor for the age reached that year, taken in equal monthly installments. The first-RMD April-1 deferral is not modeled, and neither is the still-working exception — the traditional bucket is treated as IRA-like.
The sensitivity band. The whole simulation is re-run at 2 points lower and 2 points higher on both returns, inflation unchanged. The band is two more guesses at the return, not a forecast — and not a probability. There is no Monte Carlo here and no probability-of-success: a single deterministic path with a band states plainly what it does not know, and a probability would imply a distribution the tool does not have.
The 4% rule, as a benchmark only. The 4% rule says you could take 4% of the balance at retirement each year, adjusted for inflation. It is shown beside your plan’s first-year withdrawal so you can compare — never as a recommendation. The rule comes from Bengen’s work on 30-year retirements, US historical data, and 50–75% equity portfolios; the tool’s own simulation is the answer, and the benchmark is the yardstick beside it.
The priced lever. When the plan runs out, the tool solves for what would fix it: while you are still working, the extra annual contribution (into the traditional bucket only) that would make the plan last to your life expectancy, found by bisection and rounded up to the next $10; when you are already retired, the maximum annual spending that would last to your life expectancy, rounded down to the next $10.
Assumptions and sources
- This is a model, not a forecast. Returns, inflation, and tax law are assumptions. The sensitivity band shows two more guesses, not a range of likely outcomes. No Monte Carlo, no probability-of-success.
- Tax model, in full. 2027 brackets and standard deduction held flat; proper §86 combined-income computation for taxable Social Security. What is not modeled: the additional standard deduction for age 65 and up; the $6,000 senior deduction, which is temporary for tax years 2025–2028 and phases out above $75,000 ($150,000 married) of modified adjusted gross income; IRMAA — the Roth Conversion Ladder remains the IRMAA tool; capital gains, because the taxable bucket is treated as basis; the still-working RMD exception; and the April-1 first-RMD deferral.
- RMD simplifications. Equal monthly installments, computed from the prior December 31 balance. Readers born before July 1, 1949 use age 72 in this tool — the pre-SECURE 70½ rule is not modeled. The 1959 cohort uses 73, on the basis of the 2024 proposed regulations.
- Social Security simplifications. The PIA is an input — the tool does not compute a PIA from an earnings history. No earnings test, no spousal or survivor benefits, and pre-retirement Social Security is not added to the portfolio. Benefits escalate at the inflation assumption. The full claiming analysis — survivor floor, break-even ages, the earnings test — is the Social Security Claiming Calculator.
- Drawdown order is a modeling choice, not advice. Taxable, then traditional, then Roth, fixed in this version — see coordinating TSP, IRA, and taxable accounts for why the order matters and what the alternatives are.
- The 4% rule is a benchmark, not a recommendation. Bengen conditions: 30 years, US historical data, 50–75% equities. See Withdrawal Strategies Compared.
- Single-person only. No spouse or household modeling in this version — the Social Security tool’s spousal and survivor modules are not consumed here.
- Life expectancy. SSA’s 2022 period life table — a man reaching 65 lives 17.48 more years on average, a woman 20.12. The tool shows the deterministic outcome at the age you enter; it does not weight the answer by mortality.
- What this tool does not model: computing a PIA from an earnings history; Roth conversions (that lever belongs to the Roth Conversion Ladder); and any change in the tax brackets, the standard deduction, or the Social Security thresholds after 2027 — all three are held at their 2027 values for every year shown.
Official documentation and references
- Internal Revenue Service, IRS Provides Tax Inflation Adjustments for Tax Year 2027 (Rev. Proc. 2026-35; IR-2026-133, Nov 5, 2026) — the 2027 brackets and standard deduction this tool holds flat.
- 26 U.S.C. §86, Taxation of Social Security benefits (Cornell LII), and IRS Publication 915, Social Security and Equivalent Railroad Retirement Benefits — the combined-income thresholds and the 0% / 50% / 85% tiers.
- Internal Revenue Service, Publication 590-B, Distributions from Individual Retirement Arrangements, Appendix B Table III — the Uniform Lifetime Table divisors.
- Internal Revenue Service, Required Minimum Distributions — the RMD ages under SECURE 2.0 and the final regulations of July 19, 2024.
- Social Security Administration, Benefits Planner: Retirement Age — the full retirement age table and the reduction and delayed-credit rates.
- Social Security Administration, Period Life Table, 2022 — life expectancy at 65.
- William P. Bengen, Determining Withdrawal Rates Using Historical Data (Journal of Financial Planning, 1994) — the 4% rule’s origin and conditions.
Educational disclaimer: This calculator is general education, not personalized financial, tax, or benefits advice. It models the inputs you enter under the assumptions stated above; it does not know your earnings record, your actual tax situation, or your health. Your actual Social Security benefit is set by SSA from your record, your actual tax is set by the law in the year it is due, and your actual required minimum distributions follow the rules in force then. Nothing you type is saved or sent anywhere.
Keep going
- TSP Growth Projector — see the same saving years on their own
- Social Security Claiming Calculator — the full claiming analysis: survivor floor, break-even ages, the earnings test
- Roth Conversion Ladder — Roth conversions are the lever this tool doesn’t pull; here is the tool that does
- Compound Interest Calculator
- FIRE Calculator — the same plan without taxes, Social Security, or a pension: the FIRE number and the month you could stop saving — the growth engine, on its own
- FERS Annuity Estimator — federal? Get your annuity first, then enter it as your pension here
- The Four-Legged Stool: Retirement Income, Assembled
- Withdrawal Strategies Compared
- Sequence of Returns Risk, Explained
- Inflation and Your Retirement Plan
- Social Security Is Longevity Insurance — Claim Accordingly
- IRMAA 2027, Explained
- TSP Withdrawals and RMDs in Retirement
- Pension Lump Sum vs. Annuity, Explained
- Behind on Retirement? The Catch-Up Order
- Coordinating TSP, IRA, and Taxable Accounts
- Your First Years of Retirement Spending
- FERS COLA, Explained
- 2027 Contribution Limits: 401(k), TSP, IRA, HSA, and FSA in One Table
- Roth TSP vs. Traditional TSP
- TSP Funds, Explained
- TSP Options When You Leave
- All Retirement guides
- Household Together